GM GOODWRENCH 4.3 V6 DIESEL ENGINE COMPONENTS

VEHICLES AFFECTED: 1982-84 'A' and'G' Series Vehicles and 1985 'C' Series

A GM Goodwrench 4.3L V-6 diesel engine is now available through WDDGM for current and past model vehicles equipped with 4.3L V-6 diesel engine. All GM Goodwrench 4.3L V-6 diesel engines are manufactured with new components. They all contain roller lifter valve trains and incorporate all refinements of current model production.

The GM Goodwrench engine for the LT7 option on 'A' and 'C' Series are equipped with aluminum cylinder heads.

APPLICATION

1985 Series Package No. ----------- ----------- LT7 'C' Series (Front Wheel Drive) 22525606

1982-83-84 Series Package No. ------------------ ----------- LT6 'G' Series (Rear Wheel Drive) 22525605 LT7 'A' Series (Front Wheel Drive) 22525606

WHAT'S INCLUDED ---------------- Cylinder block assembly, connecting rod and piston assemblies, crankshaft, crankshaft balancer hub, camshaft, cylinder head assemblies including valve trains, camshaft and crankshaft sprockets with chain, timing gears and timing cover, oil pump and screen, oil pan, oil filter (LT7 only), oil level indicator guide and instruction sheet.

The engine will contain oil. The label on the intake manifold cover will indicate the type of oil, winter or summer, that is installed in the engine. It may be necessary to change the oil if it is incorrect for the season that exists when the engine is being installed.

WHAT'S NOT INCLUDED ------------------- In most cases the components not included with the GM Goodwrench engine can be transferred from the engine being replaced. Specifically these parts are: intake manifold and related plumbing, exhaust manifold, alternator, power steering, vacuum pump, injection pump, injection nozzles and pipes, fuel pumps, filter and pipes, water pump, block heater, flywheel, pulleys, brackets and belts.

WHAT MUST BE ORDERED SEPARATELY

Intake Manifold Gasket Kit Water Pump Body Gasket Oil Filter Base Gasket (LT6 Only)

LABOUR TIME ALLOWANCE:

LT6 'G' Series 6.6 hrs. LT7 'A' Series 7.6 hrs. LT7 'C' Series 7.8 hrs.

Add: With Cruise Control .1 hr. With Air Conditioning .3 hr. (.4 hr.'A'&'C'Series) Replace Governor Weight .7 Retaining Ring (If Required)

Includes: R & R hood, belts, fan and flywheel cover, D & C exhaust pipes, fuel and vacuum lines, linkage, starter and hoses. Drain and refill engine oil (if required) and coolant. Check injection pump governor weight retaining ring. Make all necessary adjustments including dynamic timing. Also includes time to transfer all required parts.

Use most applicable Labour Operation from Canadian Labour Time Guide and Claim.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.