GM Service Manual Online
For 1990-2009 cars only

WINDNOISE AT DOOR OUTER BELT AREA (SERVICE PROCEDURE)

MODELS/YEARS 1988-89 CUTLASS SUPREME MODELS

An area of windnoise on 1988-89 Cutlass Supreme coupes may be under the door beltline reveal molding and mirror patch.

(NOTE: The 1989 Cutlass Supreme Service Manual, page 10-5-6 Figure 12, is an incorrect illustration of the belt molding, as it does not show the front position of the molding which fastens under the side mirror.)

1. To repair this condition, remove the door trim panel, mirror, mirror patch, and lock rod cover in order to access rear outer belt seal strip retaining screw.

2. Apply cloth-backed tape as a protective cover over the painted surface of the door frame applique to protect finish during removal of the outer belt seal strip.

3. After outer beltline reveal molding screws have been removed, start at the rear of the molding and pull up and outboard to remove.

4. With molding removed, apply a bead of silicone along the full length of the molding in the molding cavity as shown in Figure 1.

5. After reinstallation of the molding to the door frame, position the rear flap of the outer belt seal strip downward at the rear applique. Position the front flap of the outer seal strip behind the metal flange (NOT outside of the flange) at the mirror patch.

6. With silicone fill the cavities behind the outer belt seal molding to the door frame at the mirror patch as shown in Figure 2.

7. Reinstall mirror patch, mirror and trim pad.

WARRANTY INFORMATION:

Labor Operation Number: T1542RightSide T1543 Left Side

Labor Time: 0.5 Per Side Trouble Code: 92


Object Number: 91908  Size: MF


Object Number: 89639  Size: MF

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.