SERVICE MANUAL UPDATE WHEEL ALIGNMENT SPECIFICATION

VEHICLES AFFECTED: 1989 W-CARS

SERVICE MANUAL UPDATE

The rear alignment specification of toe has been changed. The new specification is:

TOTAL TOE: 0 degrees plus or minus .3 degrees --------- This new specification should be used in place of the specification found in the chart on page 3A-8 of the 1989 Service Manual.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.