TRIM DAMAGE FRONT SEAT SIDE PANEL (RPL. FOAM CUSHION/TRIM)

SUBJECT: TRIM DAMAGE FRONT SEAT SIDE PANEL (REPLACE FOAM CUSHION AND TRIM) (IF REQUIRED)

VEHICLES AFFECTED: 1992-93 OLDSMOBILE "W" MODEL WITH RPO AN3

CONDITION:

Some 1992-93 Oldsmobile W cars may exhibit stress marks on driver and/or passenger seat back trim side panel.

CAUSE:

Wire within foam bun exerts excessive pressure on foam side panel while sliding into or out of front seats.

CORRECTION:

Replace front seat back foam cushion P/N 16726120 and trim if damaged. Follow procedure in Body Service Manual, Section 10, Page 10-10-8.

For vehicles repaired under warranty use:

Labour Operation: c7O5O Passenger C7051 Driver Labour Time: 0.8 Hours 0.7 Hours

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.