For 1990-2009 cars only
- Use a long screwdriver in order to depress the reverse band servo cover (40) by prying against the transmission holding fixture.
- Use a small screwdriver in order to pry out the retaining ring (39) from the reverse band servo cover.
- Remove the long screwdriver. The servo assembly will push the servo cover (40) up.
- Use a small screwdriver in order to pull the servo cover O-ring seal (41) out through the slot in the case.
- Use side cutting pliers in order to cut the servo cover O-ring seal (41).
- Grasp one end of the cut seal (41) and pull it out of the servo cover.
- Remove the servo cover (40).
- Remove the reverse band servo o-ring seal (41).
- Remove the reverse band servo assembly (42-48).
- Remove the reverse band servo piston spring (49).
