FRONT STABILIZER BAR INSULATOR BUSHING SQUEAK

STABILIZER BAR INSULATOR BUSHING SQUAWK

1985-86 CALAIS & FIRENZA

A squawk noise from the front stabilizer bar insulator bushings may be collected by installing new Teflon lined bushings. The new bushings are being used in production beginning approximately February 1, 1986.

Oldsmobile bushing part numbers and applications are shown below.

Stabilizer Bar Bushing for 24mm Shaft Diameter

Part No. 22532210 85-86 Firenza VIN Code 0 & P except F41 Suspension

(Replaces No. 14085145) 85-86 Calais except F41 Suspension

Stabilizer Bar Bushing for 28mm Shaft Diameter

Part No. 22532212 85-86 Firenza with F41 Suspension

(Replaces No. 14085147) 85-86 Firenza VIN W (2.8)

85-86 Calais with FE3 or F41 Suspension

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.