Front Side Door Inside Handle Replacement for Oldsmobile Intrigue 1998

1. Raise the front door window to the full up position.
2. Remove the trim panel. Refer to Front Side Door Trim Panel Replacement .
3. Remove the water deflector. Refer to Front Side Door Water Deflector Replacement



4. Disconnect the clips securing the rods to the handle.
5. Remove the rods from the inside door handle.



6. Remove the rivet mounting the inner door handle.

Use a center punch to drive the door handle mounting rivet mandrel into the rivet head to create a pilot hole.

Use a 6.35 mm (1/4 in) drill bit to drill out the rivet.

7. Remove the inside door handle.

1. Install the front door inside door handle tabs in the front door.



2. Connect the clips to the front door inside door handle and the lock rods to the handle.



3. Install the rivet to the front door inside door handle.
4. Install the water deflector. Refer to Front Side Door Water Deflector Replacement .
5. Install the trim panel. Refer to Front Side Door Trim Panel Replacement .