GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 1999 🢒 Intrigue 🢒 Engine 🢒 Engine Mechanical - 3.5L 🢒 Air Cleaner Element Replacement

Removal Procedure
  1. Disconnect the IAT sensor electrical connector.
  2. Loosen the air inlet hose clamp.

    3. Object Number: 444460 Size: SH
  3. Carefully remove the air inlet hose from the throttle body and air cleaner cover (5).
  4. Remove the 2 housing cover retaining Screws .
  5. Remove the air cleaner cover and carefully remove the air filter element.
  6. Inspect the housing cover (4), seal assembly, and air ducting (2) for damage. If a problem is found, replace as necessary.

Installation Procedure

    Object Number: 444460 Size: SH
  1. Carefully install the air filter element (6)into the air cleaner assembly (1).
  2. Reinstall the housing cover (5) and reinstall the housing cover retaining screws (2).
  3. Carefully reinstall the air inlet hose to the throttle body and air cleaner cover.
  4. Tighten the air inlet hose clamp.
  5. Connect the IAT sensor electrical connector.