For 1990-2009 cars only
Cleaning Procedure
- Clean the oil pan in solvent.
- Clean out debris from the bolt holes.
- Dry the oil pan with compressed air.
Caution: Wear safety glasses in order to avoid eye damage.
Inspection Procedure
- Inspect the exterior of the oil pan for the following conditions:
- Inspect the interior of the oil pan for the following conditions:
- Inspect the oil filter cap for the following conditions:
- Repair or replace the oil pan and/or filter cap as necessary.
| • | Damage to the drain plug or drain plug hole (1) |
| • | Damage to the transaxle mounting boss (2) |
| • | Damage to the oil level sensor bolt hole threads (3) |
| • | Damage to the oil level sensor hole (4) |
| • | Damage to the oil filter cap oil pan threads (5) |
| • | Damage to the transaxle brace mounting bosses (6) |
| • | Dents or damage to the exterior |
| • | Gouges or damage to the oil pan sealing surfaces (1) |
| • | Damage to the oil pan baffle (2) |
| • | Damage to the bolt holes (3) |
| • | Damage to the oil filter cap threads (1) |
| • | Damage to the sealing O-rings (2) |
| • | Damage to the hold area (3) |
