Camshaft Cover Installation Left
- Install new spark plugs.
- Remove the J 42038 from the rear of the cylinder head.
- Wipe the cylinder head sealing surface with a clean, lint-free cloth.
- Place the camshaft cover in position on the cylinder head.
- Install the camshaft cover bolts.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the spark plugs to 20 N·m (15 lb ft).
Tighten
Tighten the camshaft cover bolts to 9 N·m (80 lb in).
Camshaft Cover Installation Right
- Install new spark plugs.
- Remove the J 42038 from the rear of the cylinder head.
- Wipe the cylinder head sealing surface with a clean, lint-free cloth.
- Place the camshaft cover in position on the cylinder head.
- Install the camshaft cover bolts.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the spark plugs to 20 N·m (15 lb ft).
Tighten
Tighten the camshaft cover bolts to 9 N·m (80 lb in).
