- Remove the front engine
lift bracket bolts.
- Remove the front engine lift bracket.
- Remove the camshaft position
sensor bolt.
- Remove the camshaft position sensor.
- Remove and discard the camshaft position sensor O-ring.
- Remove the four chain
guide access plugs located in the cylinder heads. Note the O-ring seal on
each access plug.
- Loosen both primary camshaft
drive chain tensioner bolts.
- Remove the lower primary camshaft drive chain tensioner bolt allowing
the primary camshaft drive chain tensioner to swing downward and expand. This
will release tension on the primary camshaft drive chain.
- Remove the upper primary camshaft drive chain tensioner bolt.
- Remove the primary camshaft drive chain tensioner (1).
- Remove the primary camshaft
drive chain tensioner shoe bolt.
- Remove the primary camshaft drive chain tensioner shoe (1)
by pushing the guide downward slightly and then pulling it up through the
cylinder head.
- Remove the primary camshaft drive chain from the RH camshaft sprocket
and allow the chain to fall into the oil pump area of the cylinder block.
- Remove the primary camshaft
drive chain.
- Loosen the primary camshaft
drive chain tensioner oil tube bolts.
- Remove the primary camshaft drive chain tensioner oil tube (1).