Important: Always maintain cleanliness when servicing fuel system components.

1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief .
2. Remove the modular fuel sender assembly. Refer to Fuel Sender Assembly Replacement .
3. Remove the fuel level sensor (5) from the modular fuel sender.

1. Install the fuel level sensor (5) to the modular fuel sender.
2. Install the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .
3. Inspect for fuel leaks.

3.1.	Turn the ignition switch on for 2 seconds.

3.2.	Turn the ignition switch to the off for 10 seconds.

3.3.	Turn the ignition switch on.

3.4.	Inspect for fuel leaks.