GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 1999 🢒 Intrigue 🢒 Suspension 🢒 Rear Suspension 🢒 Stabilizer Shaft Link Shield Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

    2. Object Number: 156945 Size: SH
  2. Disconnect the rear stabilizer shaft link (2) from the stabilizer shaft (3). Refer to Stabilizer Shaft Replacement in this section.
  3. Remove the rear stabilizer shaft shield (1) from the rear stabilizer shaft end (3).

Installation Procedure

    Object Number: 156945 Size: SH
  1. Install the rear stabilizer shaft shield (1) to the rear stabilizer shaft end (3).
  2. Connect the rear stabilizer shaft link (2) to the rear stabilizer shaft (3). Refer to Stabilizer Shaft Replacement in this section.
  3. Lower the vehicle.