GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 1999 🢒 Intrigue 🢒 Transmission/Transaxle 🢒 Automatic Transaxle - 4T65-E 🢒 Transmission Control Replacement

Removal Procedure
  1. Open the console storage lid.
  2. Ensure the cup holder is in the open position.

    3. Object Number: 289504 Size: SH
  3. Remove the front floor console trim plate. Refer to Front Floor Console Trim Plate Replacement in Instrument Panel, Gauges, and Console.

    4. Object Number: 289506 Size: SH
  4. Remove console shifter control trim plate bolts

    5. Object Number: 289507 Size: SH
  5. Remove the front floor console bolts.
  6. Remove the front floor console.

    7. Object Number: 161223 Size: SH
  7. Disconnect the console shift control wiring harness, right side.

    8. Object Number: 161221 Size: SH
  8. Remove the automatic transaxle range selector cable retainer.

    9. Object Number: 161220 Size: SH
  9. Disconnect and remove the automatic transaxle range selector cable from the console shift control and bracket.

    10. Object Number: 161222 Size: SH
  10. Disconnect the console shift control wiring harness, left side.

    11. Object Number: 161226 Size: SH
  11. Disconnect and remove the park lock cable from the console shift control and bracket.

    12. Object Number: 161218 Size: SH
  12. Remove the console shift control nuts.
  13. Remove the console shift control.

    14. Object Number: 289502 Size: SH
  14. Remove the retainer (1) in order to remove the console shift control handle.

Installation Procedure
  1. Install the console shift control handle, if removed.
  2. Install the console shift control handle retainer.

    3. Object Number: 289502 Size: SH
  3. Correctly installed console shift control handle retainer (1).

    4. Object Number: 289503 Size: SH
  4. Incorrectly installed console shift control handle retainer (1).

    5. Object Number: 161218 Size: SH
  5. Install the console shift control.

    6. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  6. Install the console shift control nuts.

    7. Tighten
    Tighten the console shift control nuts to 24 N·m (18 lb ft).


    Object Number: 161226 Size: SH
  7. Install and connect the park lock cable to the console shift control and bracket.
  8. Adjust the park lock cable. Refer to Park Lock Cable Adjustment .

    9. Object Number: 161222 Size: SH
  9. Connect the console shift control wiring harness, left side.

    10. Object Number: 161220 Size: SH
  10. Install and connect the automatic transaxle range selector cable to the console shift control and bracket.

    11. Object Number: 161221 Size: SH
  11. Install the automatic transaxle range selector cable retainer.
  12. Adjust the automatic transaxle range selector cable. Refer to Range Selector Lever Cable Adjustment .

    13. Object Number: 161223 Size: SH
  13. Connect the console shift control wiring harness, right side.

    14. Object Number: 289507 Size: SH
  14. Install the front floor console.
  15. Install the front floor console bolts.

    16. Tighten
    Tighten the front floor console bolts to 6 N·m (53 lb in).


    Object Number: 289506 Size: SH
  16. Install console shifter control trim plate bolts

    17. Tighten
    Tighten the console shift control trim plate bolts to 20 N·m (15 lb ft).


    Object Number: 289504 Size: SH

    Important: The cup holder must be in the open position in order to install the front floor console trim plate.

  17. Install the front floor console trim plate. Refer to Front Floor Console Trim Plate Replacement in Instrument Panel, Gauges, and Console.

    18. Tighten
    Tighten the front floor console trim plate bolts to 2 N·m (14 lb in).