Automatic Transmission Fluid Pressure Test Hole Plug Replacement 3.5L Twin Cam V6 LX5

1. Remove the throttle body air inlet duct. Refer to Air Cleaner Inlet Duct Replacement in Engine Controls.



2. Remove the line the pressure pipe plug (38).

1. Apply sealant GM P/N 8654382 to the line pressure plug.




Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the line pressure pipe plug (38).

Tighten
Tighten the line pressure pipe plug (38) to 11 N·m (97 lb in).

3. Install the throttle body air inlet duct. Refer to Air Cleaner Inlet Duct Replacement in Engine Controls.

Automatic Transmission Fluid Pressure Test Hole Plug Replacement 3800 L36

1. Remove the throttle body air inlet duct. Refer to Air Cleaner Inlet Duct Replacement in Engine Controls.



2. Remove the line the pressure pipe plug (38).

1. Apply sealant GM P/N 8654382 to the line pressure plug.




Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the line pressure pipe plug (38).

Tighten
Tighten the line pressure pipe plug (38) to 11 N·m (97 lb in).

3. Install the throttle body air inlet duct. Refer to Air Cleaner Inlet Duct Replacement in Engine Controls.