Accumulator and 2-1 Manual Servo Replacement 3.5L Twin Cam V6 LX5

1. Remove the oil pan. Refer to Oil Pan Replacement .
2. Remove the filter. Refer to Automatic Transmission Fluid Filter and Seal Replacement .



3. Remove the accumulator attaching bolts (131).
4. Remove the manual 2-1 band servo cover bolts (103).



5. Remove the accumulator (132).
6. Remove the manual 2-1 band servo cover (104).



7. Remove the manual 2-1 band servo (106-116).
8. Remove the manual 2-1 band servo cover gasket (105) from the case.
9. To disassemble, inspect and service the accumulator and manual 2-1 band servo, refer to Transmission/Transaxle/Transfer Case Unit Repair Manual.

1. Install the manual 2-1 band servo (106-116).
2. Install the manual 2-1 band servo cover gasket (105) into the case.
3. Install the manual 2-1 band servo cover (104).

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

4. Install the manual 2-1 band servo cover bolts (103).

Tighten
Tighten the manual 2-1 band servo cover bolts (103) to 24 N·m (17 lb ft).




5. Install the accumulator (132).



6. Install the accumulator attaching bolts (131).

Tighten
Tighten the accumulator attaching bolts (131) to 11 N·m (97 lb in).

7. If removed, install a new filter seal.
8. Install the filter. Refer to Automatic Transmission Fluid Filter and Seal Replacement .
9. Install the oil pan. Refer to Oil Pan Replacement .

Accumulator and 2-1 Manual Servo Replacement 3800 L36

1. Remove the oil pan. Refer to Oil Pan Replacement .
2. Remove the filter. Refer to Automatic Transmission Fluid Filter and Seal Replacement .



3. Remove the accumulator attaching bolts (131).
4. Remove the manual 2-1 band servo cover bolts (103).



5. Remove the accumulator (132).
6. Remove the manual 2-1 band servo cover (104).



7. Remove the manual 2-1 band servo (106-116).
8. Remove the manual 2-1 band servo cover gasket (105) from the case.
9. To disassemble, inspect and service the accumulator and manual 2-1 band servo, refer to Transmission/Transaxle/Transfer Case Unit Repair Manual.

1. Install the manual 2-1 band servo (106-116).
2. Install the manual 2-1 band servo cover gasket (105) into the case.
3. Install the manual 2-1 band servo cover (104).

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

4. Install the manual 2-1 band servo cover bolts (103).

Tighten
Tighten the manual 2-1 band servo cover bolts (103) to 24 N·m (17 lb ft).




5. Install the accumulator (132).



6. Install the accumulator attaching bolts (131).

Tighten
Tighten the accumulator attaching bolts (131) to 11 N·m (97 lb in).

7. If removed, install a new filter seal.
8. Install the filter. Refer to Automatic Transmission Fluid Filter and Seal Replacement .
9. Install the oil pan. Refer to Oil Pan Replacement .