Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 |
Are the headlamp bulbs and connectors OK? | -- | ||
2 |
Does the test light illuminate? | -- | ||
3 | Using a test light, probe between the underhood accessory wiring junction block harness connector C3 terminal E2 and ground. Does the test light illuminate? | -- | ||
4 | Repair the poor connection or open in circuit 1740 between the underhood accessory wiring junction block harness connector C3 terminal E2 and the RH headlamp harness connector C142 terminal F. Has the repair been made? | -- | Go to Headlight System Check | -- |
5 |
Does the test light illuminate? | -- | ||
6 |
Does the test light illuminate? | -- | ||
7 | Repair the poor connection or open in circuit 1200 between the RH headlamp harness connector C142 terminal G and the underhood accessory wiring junction block harness connector C3 terminal C8. Has the repair been made? | -- | Go to Headlight System Check | -- |
8 | Replace the RH headlamp. Refer to Headlamp Replacement . Has the repair been made? | -- | Go to Headlight System Check | -- |
9 | Check for a poor connection at the underhood accessory wiring junction block. Is there a poor connection? | -- | ||
10 | Replace the damaged component or repair the poor connection. Has the repair been made? | -- | Go to Headlight System Check | -- |
11 | Replace the underhood accessory wiring junction block. Refer to Accessory Wiring Junction Block Replacement in Body Front End. Has the repair been made? | -- | Go to Headlight System Check | -- |
