Daytime Running Lights (DRL) Control Module Replacement for Oldsmobile Intrigue 1999

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.
2. Remove the LH instrument panel insulator. Refer to Instrument Panel Insulator Replacement in Instrument Panel, Gauges and Console.
3. Grasp the daytime running lamp (DRL) module and slide it upward to release the module tabs from the retaining slots on the BCM bracket; reposition the module.
4. Disconnect the electrical connectors from the DRL control module and remove the module.

1. Connect the electrical connectors to the DRL control module.
2. Position the DRL control module to the BCM bracket, then slide the module downward to secure the module tabs into the retaining slots on the bracket.
3. Install the LH instrument panel insulator. Refer to Instrument Panel Insulator Replacement in Instrument Panel, Gauges and Console.
4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.