DEFINITION: The I/P compartment lamp does not turn on when the I/P compartment is open.

Check I/P compartment bulb filament .

Is the I/P compartment lamp bulb filament open?

--

Go to Step 4

Go to Step 2

1. Disconnect the I/P compartment lamp electrical connector.
2. Using a test light, connect between B+ and the I/P compartment lamp harness connector terminal B.

Is the test light on?

--

Go to Step 3

Go to Step 5

1. Turn the ignition switch form off to on.
2. Using a test light, connect between the I/P compartment lamp harness connector terminal A and ground.

Is the test lamp on?

--

Go to Step 6

Go to Step 7

Replace the I/P compartment lamp bulb. Refer to Bulb Usage for bulb specification.

Is the repair complete?

--

System OK

--

Repair poor connection or open in circuit 1450.

Is the repair complete?

--

Go to Step 8

--

Replace the I/P compartment lamp. Refer to Instrument Panel Compartment Lamp Switch Replacement in Instrument Panel, Gauges and Console.

Is the repair complete?

--

Go to Step 8

--

Repair poor connection or open in circuit 1732.

Is the repair complete?

--

Go to Step 8

--

1. Turn the ignition switch off.
2. Reinstall the connectors/components removed.
3. Check for BCM DTCs. Refer to Diagnostic Trouble Code (DTC) Displaying in Body Control System.

Are there any DTCs stored in the BCM?

--

Go to Diagnostic System Check - Body Control System in Body Control System

System OK