DEFINITION: The I/P compartment lamp stays on when the I/P compartment is closed. However, the inadvertent load (battery rundown) protection turns off the I/P compartment lamp after 20 minutes.

Check the I/P compartment lamp switch for proper contact and interface with the I/P compartment. Refer to Instrument Panel Compartment Door Lock Striker Adjustment in Instrument Panel, Gauges and Console.

Any problem found with the contact and operation of the I/P compartment lamp switch?

--

Go to Step 2

Go to Step 3

Repair the interface between the I/P compartment lamp switch and the IP compartment. Refer to Instrument Panel Compartment Door Lock Striker Adjustment in Instrument Panel, Gauges and Console.

Is the repair complete?

--

Go to Step 4

--

Replace the I/P compartment lamp. Refer to Instrument Panel Compartment Lamp Switch Replacement in Instrument Panel, Gauges and Console.

Is the repair complete?

--

Go to Step 4

--

1. Turn the ignition switch off.
2. Reinstall the connectors/components removed.
3. Check for BCM DTCs. Refer to Diagnostic Trouble Code (DTC) Displaying in Body Control System.

Are there any DTCs stored in the BCM?

--

Go to Diagnostic System Check - Body Control System in Body Control System

System OK