Step
| Action
| Value(s)
| Yes
| No
|
1
|
- Make sure that the transaxle gear selector is in PARK.
- Press the rear compartment lid release button located in the I/P.
Does the rear compartment lid unlatch?
| --
|
Go to Step 2
|
Rear Compartment Lid Release Inoperative
|
2
|
- Program a known good keyless entry transmitter. Refer to
Transmitter Programming
for more
information.
- Using known good transmitter, attempt to unlatch the rear compartment
lid.
Does the rear compartment lid unlatch?
| --
|
Go to Step 3
|
Go to Step
4
|
3
|
- Replace the faulty transmitter.
- Program keyless entry transmitter(s). Refer to
Transmitter Programming
for more information.
Is the repair complete?
| --
| Go to
Step
7
| --
|
4
|
- Disconnect the Remote Control Door Lock Receiver (RCDLR).
- Connect briefly a 10A fused jumper between the RCDLR harness connector
H and ground.
Did the rear compartment lid unlatch?
| --
| Go to
Step 5
| Go to
Step 6
|
5
|
- Replace the Remote Control Door Lock Receiver (RCDLR). Refer to
Receiver Replacement
for more information.
- After RCDLR replacement, program keyless entry transmitter(s).
Refer to
Transmitter Programming
for more information.
Is the repair complete?
| --
| Go to
Step
7
| --
|
6
| Repair poor connection or open in circuit 253 between the RCDLR harness
connector terminal H and the rear compartment lid release relay harness connector
terminal C2.
Is the repair complete?
| --
| Go to
Step
7
| --
|
7
| Reconnect connectors/components removed.
Is the action complete?
| --
| Go to
Diagnostic System Check - Remote Keyless Entry
| --
|
