GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 1999 🢒 Intrigue 🢒 Preface 🢒 Cautions and Notices 🢒 Hood Replacement

Removal Proceadure

    Object Number: 183035 Size: SH
  1. Open and support the hood.
  2. Mark the upper hood hinge location to the hood with grease pencil.
  3. Remove the bolts from the upper hood hinge with an assistant.
  4. Remove the hood from the vehicle with an assistant.

Installation Proceadure
  1. Install the hood to the vehicle with an assistant.
  2. Align the hood hinges to alignment marks on the hood.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.


    Object Number: 183035 Size: SH
  3. Install the bolts to the upper hood hinge with an assistant.

    4. Tighten
    Tighten the upper hood hinge bolts to 27 N·m (20 lb ft).

  4. Adjust the hood. Refer to Hood Adjustment .