GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 1999 🢒 Intrigue 🢒 General Information 🢒 General Information 🢒 Front Fender Liner Replacement

Removal Procedure

    Object Number: 183038 Size: SH
  1. Remove the bolts from the front fender liner at the front bumper fascia.

    2. Object Number: 363708 Size: SH
  2. Remove the nut from the stud at rear of front fender liner.

    3. Object Number: 363708 Size: SH
  3. Remove the bolt from the front tab of the front fender liner at the lower engine compartment side rail.

    4. Object Number: 363708 Size: SH
  4. Remove the bolts from the front fender liner at the rear of fender.
  5. Remove the front fender liner from fender.

Installation Procedure

    Object Number: 363708 Size: SH
  1. Install the front fender liner to the wheelhouse opening over the stud.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the nut to the stud at rear of the front fender liner.

    3. Tighten
    Tighten the front fender liner nut to 4 N·m (35 lb in).


    Object Number: 183038 Size: SH
  3. Install the bolts to the front fender liner at the front bumper fascia.

    4. Tighten
    Tighten the front bumper fascia bolts to 2  N·m(18 lb in).


    Object Number: 363708 Size: SH
  4. Install the bolts to the front fender liner at the rear of fender.

    5. Tighten
    Tighten the front fender liner bolts to 7 N·m (61 lb in).


    Object Number: 363708 Size: SH
  5. Install the bolt to the front tab of the front fender liner at the lower engine compartment side rail.

    6. Tighten
    Tighten the front fender liner at the rear of fender bolts to 7 N·m (61 lb in).