GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2000 🢒 Intrigue 🢒 Engine 🢒 Engine Electrical 🢒 Control Assembly Replacement

Removal Procedure
  1. Remove the instrument panel accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement in Instrument Panel, Gauges and Console.

    2. Object Number: 233693 Size: SH
  2. Remove the bolts from the HVAC control assembly.
  3. Disconnect the electrical connectors from the HVAC control assembly.
  4. Remove the heater HVAC control assembly from the instrument panel.

Installation Procedure

    Object Number: 233693 Size: SH
  1. Connect the electrical connectors to the HVAC control assembly.
  2. Install the heater HVAC control assembly to the instrument panel.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the bolts to the HVAC control assembly.

    4. Tighten
    Tighten the HVAC control assembly bolts to 2 N·m (18 lb ft).

  4. Install the instrument panel accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement in Instrument Panel, Gauges and Console.