Circuit Description
The instrument panel cluster (IPC) turns the LOW TRAC Indicator on during the IPC bulb check for approximately 3 seconds when the ignition switch is turned to the ON position. The LOW TRAC Indicator is activated during a traction control event only. If the EBCM detects a low traction condition, the EBCM sends the IPC the command to turn the LOW TRAC indicator on.
Test Description
The numbers below refer to step numbers on the diagnostic table.
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
DEFINITION: The LOW TRAC indicator does not turn off after the instrument panel cluster (IPC) bulb check and there is not a low traction condition. | ||||
1 | Was the ABS Diagnostic System Check performed? | -- | ||
Using a scan tool in the Instrument Panel Cluster Special Functions attempt to turn off the LOW TRAC indicator. Did the LOW TRAC indicator turn off? | -- | |||
3 | Replace the EBCM. Refer to Electronic Brake and Traction Control Module Replacement . Is the replacement complete? | -- | -- | |
4 | Replace the instrument panel cluster. Refer to Instrument Cluster Replacement in Instrument Panel, Gauges and Console. Is the replacement complete? | -- | -- | |
