Power Steering Hoses Replacement for Oldsmobile Intrigue 2000

1. Remove the power steering return hose from the power steering pump.
2. Remove the rubber section of the power steering return hose from the power steering return line.
3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
4. Remove the tire and wheel assembly.Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
5. Remove the rubber section of the power steering return hose that connects the power steering return line to the power steering cooler pipe.

1. Install the rubber section of the power steering return hose that connects the power steering return line to the power steering cooler pipe.

Tighten
Tighten the power steering return hose clamps to 27 N·m (20 lb ft).




2. Install the tire and wheel assembly.Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
3. Lower the vehicle.
4. Install the rubber section of the power steering return hose that connects the power steering return line to the power steering pump.
5. Fill the power steering system with power steering fluid. Refer to Checking and Adding Power Steering Fluid .
6. Bleed the power steering system. Refer to Power Steering System Bleeding .
7. Inspect the system for leaks. Refer to Power Steering Gear and Pump Leaks .