GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2000 🢒 Intrigue 🢒 Steering 🢒 Steering Wheel and Column - Tilt 🢒 Enabling the SIR System

    Object Number: 217468 Size: SH
  1. Remove the key from the ignition switch.
  2. Connect the passenger yellow 2-way connector located to the right of the steering column.

    3. Object Number: 217465 Size: SH
  3. Install the Connector Position Assurance (CPA) to the passenger yellow 2-way connector located to the right of the steering column.

    4. Object Number: 217461 Size: SH
  4. Connect the driver yellow 2-way connector located at the base of the steering column.

    5. Object Number: 217456 Size: SH
  5. Install the Connector Position Assurance (CPA) to the driver yellow 2-way connector located at the base of the steering column.

    6. Object Number: 319356 Size: SH
  6. Install the left instrument panel insulator. Refer to Instrument Panel Insulator Replacement in Instrument Panel, Gauges and Console.
  7. Install the AIR BAG fuse to the fuse block.
  8. Install the right instrument panel cover. Refer to Instrument Panel Outer Trim Cover Replacement in Instrument Panel, Gauges and Console.
  9. Staying well away from both air bags, turn the ignition switch to the RUN position.
    10. 9.1. The AIR BAG warning lamp will flash seven times.
    9.2. The AIR BAG warning lamp will then turn OFF.
  10. Perform the A Diagnostic System Check - SIR if the AIR BAG warning lamp does not operate as described.