Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Instrument Panel Cluster Diagnostic System Check? | -- | Go to Step 2 | |
2 | Verify that the fault is present. Does the system operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 |
Does the odometer switch between trip and season? | -- | Go to Step 7 | Go to Step 4 |
4 | Inspect for poor connections, open or high resistance on circuit 1358 between trip odometer reset switch and instrument cluster. Was a open or high resistance found on circuit 1358? | -- | Go to Step 5 | Go to Step 6 |
5 | Repair cicuit 1358. Is repair complete? | -- | Go to Step 10 | -- |
6 | Replace the instrument panel cluster (IPC). Refer to Instrument Cluster Replacement . Did you complete the repair? | -- | Go to Step 10 | -- |
7 | Inspect for poor connections, open or high resistance on circuit 1550 between trip odometer reset switch and G203. Was a open or high resistance found on circuit 1550? | -- | Go to Step 8 | Go to Step 9 |
8 | Repair circuit 1550. Is the repair complete? | -- | Go to Step 10 | -- |
9 | Replace trip odometer reset switch. Refer to Trip Odometer Reset Switch Replacement . Did you complete the repair? | -- | Go to Step 10 | -- |
10 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 2 |
