Removal Procedure
- Open the rear compartment.
- Remove the remote compact disc (CD) player bracket nuts. Reposition
the bracket.
- Disconnect the electrical connector from the CD player.
- Remove the CD player bracket
bolts.
- Remove the CD player.
Important: Install the transportation pin when shipping or transporting the remote
CD player.
- If shipping or transporting the remote CD player, install the transportation
pin by inserting the pin into the original position and fixing in place with
clear adhesive tape.
Installation Procedure
- Remove the transportation pin from the remote compact disc (CD)
player, if installed previously.
- Install the CD player
to the bracket.
- Install the remote CD player
bracket bolts.
Tighten
Tighten the CD player bracket bolts to 2 N·m
(18 lb in).
- Connect the electrical connector to the CD player.
- Install the CD player
bracket to the studs.
- Install the CD player bracket nuts.
Tighten
Tighten the CD player bracket nuts to 7 N·m (62 lb in).
- Close the rear compartment.