1

Did you review the Power Seats Systems Operation and perform the necessary inspections?

Go to Step 2

Go to Symptoms

Verify the fault is present.

Does the system operate normally?

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 3

1. Disconnect the FORE/AFT power seat motor connector.
2. Connect a test light between the power seat forward directional feed of the motor connector to B+.

Does the test light illuminate?

Go to Step 4

Go to Step 8

1. Connect a test light between the power seat forward directional feed of the motor connector to a good ground.
2. Press and hold the power seat switch in the forward direction.

Does the test light illuminate?

Go to Step 5

Go to Step 10

Connect a test light between the power seat rearward directional feed of the motor connector to B+.

Does the test light illuminate?

Go to Step 6

Go to Step 11

1. Connect a test light between the power seat rearward directional feed of the motor connector to a good ground.
2. Press and hold the power seat switch in the rearward direction.

Does the test light illuminate?

Go to Step 7

Go to Step 13

Inspect for poor connections at the FORE/AFT power seat motor connector. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 16

Go to Step 15

Test the power seat forward directional feed for a high resistance or an open. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and complete the condition?

Go to Step 16

Go to Step 9

Inspect the power seat forward directional feed for poor a connection at the power seat switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 16

Go to Step 14

Test the power seat forward directional feed for a short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and complete the condition?

Go to Step 16

Go to Step 14

Test the power seat rearward directional feed for a high resistance or an open. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and complete the condition?

Go to Step 16

Go to Step 12

Inspect the power seat rearward directional feed for a poor connection at the power seat switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 16

Go to Step 14

Test the power seat forward directional feed for a short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and complete the condition?

Go to Step 16

Go to Step 14

Replace power seat switch. Refer to Power Seat Switch Replacement .

Did you complete the repair?

Go to Step 16

--

Replace the FORE/AFT power seat motor. Refer to Front Seat Adjuster Motor Replacement .

Did you complete the repair?

Go to Step 16

--

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 3