Oil Level Indicator Tube Replacement for Oldsmobile Intrigue 2001

1. Remove the oil level indicator.
2. Remove the cooling fans. Refer to Engine Cooling Fan Replacement .
3. Remove the oil level indicator tube bracket bolt from the oil level indicator tube bracket.
4. Remove the oil level indicator tube.

1. Clean the oil level indicator tube.
2. Apply sealant around the oil level indicator tube 12.7 mm (0.50 in) below the bead. Use GM sealant P/N 12345493 or the equivalent.



3. Install the oil level indicator tube into the engine block.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

4. Install the bolt to the oil level indicator tube bracket.

Tighten
Tighten the oil level indicator tube bracket bolt to 9 N·m (80 lb in).

5. Install the cooling fans. Refer to Engine Cooling Fan Replacement .
6. Install the oil level indicator.