1. Start the engine.
2. Using a DMM, measure the voltage between the generator terminal L and ground.

Is the voltage greater than the specified value?

8 V

Go to Step 2

Go to Step 5

Using a DMM, measure the voltage from the BATT terminal (RED) and ground.

Is the voltage greater than the specified value?

8 V

Go to Step 3

Go to Step 6

1. Engine running at a fast idle.
2. All accessories turned OFF.
3. Using a DMM, measure the voltage across the battery terminals.

Is the voltage between the specified values?

13.3-15.5 V

Go to Step 4

Go to Step 7

1. Perform a generator load test. Refer to Generator Not Operating Properly .
2. If generator is OK, perform a battery load test. Refer to Battery Load Test .

Is repair completed?

--

Go to Charging System Check

--

Check for open or poor connections in CKT 225, (RED), between the generator terminal L and the PCM connector C2, terminal 35.

Is repair completed?

--

Go to Charging System Check

--

Check for an open in CKT 1 between the generator BATT terminal and the battery.

Is the repair completed?

--

Go to Charging System Check

--

Repair or replace the generator.

Is the repair completed?

--

Go to Charging System Check

--