GM Service Manual Online
For 1990-2009 cars only

Step

Action

Value(s)

Yes

No

1

Monitor the system voltage using scan tool while the engine is running.

Is the system voltage above the specified value?

10.6 V

Go to Step 2

Go to Step 3

2

    • Place the ignition in the OFF position.
    • Disconnect the PCM C2.
    • Turn ON the ignition.

Is the indicator still on?

--

Go to Step 4

Go to Step 5

3

    • Inspect the generator.
    • Repair as needed.

Are the repairs complete?

--

Go to Charging System Check

--

4

    • Inspect the CKT 25 (BRN) for a short to ground.
    • Repair as needed.

Are the repairs complete?

--

Go to Charging System Check

--

5

    • Inspect the PCM C2 terminal contact.
    • If OK, refer to Powertrain Control Module Diagnosis .
    • Repair or replace as needed.

Are the repairs complete?

--

Go to Charging System Check

--