For 1990-2009 cars only
Seal Replacement Recommendations for Oldsmobile LSS 1998
Lip seals seal the rotating shafts. The lip seals require special treatment. Lip seals are used on the steering gear in the following locations:
| • | At the pinion shaft |
| • | On the pump drive shaft |
When a leak occurs in these areas, perform the following steps:
- Inspect the sealing surface.
- Clean the sealing surface.
- Replace the seal.
If corrosion in the lip seal contact zone is slight, clean the surface of the shaft using a crocus cloth. Replace the shaft only under the following conditions:
| • | You find such severe pitting that cleaning the shaft will not stop the leak |
| • | Unit Repair procedures indicate that the shaft is replaceable |
