GM Service Manual Online
For 1990-2009 cars only

Compressor Control Valve Assembly Install V5 - Conventional Mount

Tools Required

J 5403 Snap Ring Pliers


    Object Number: 237069  Size: SH
  1. Coat the O-rings with 525 viscosity refrigeration oil.
  2. Using thumb pressure, push the O-rings in place.
  3. Install the valve into the case.
  4. Important: Ensure that the retaining ring is properly seated in the ring groove.

  5. Using the J 5403 , install the valve retaining ring (5) with the high point of the curved sides against the valve housing.
  6. Perform a leak test. Refer to Compressor Leak Testing .