For 1990-2009 cars only
Removal Procedure
- Remove the windshield. Refer to Windshield Replacement .
- Use a flat-bladed tool in order to carefully pry the end of the reveal molding (1) out approximately 9 cm (3 in).
- Grasp the molding with your hand. Slowly pull the reveal molding from the retainer.
Installation Procedure
- Apply tape in order to temporarily keep the reveal molding flush with the windshield.
- Press the reveal molding (1) into the retainer.
- Install the windshield. Refer to Windshield Replacement .
Start from the center of the window.
