For 1990-2009 cars only
Removal Procedure
- Open the vanity cover (1).
- Use a thin-bladed screwdriver in order to disengage the front snap legs (4) at the lower edge of the sunshade (5).
- Pull the vanity out and down in order to remove the vanity.
- Disconnect the wire connectors from the vanity, if equipped.
Important: Note the wire routing for installation.
Installation Procedure
- Partially install the vanity mirror assembly.
- Connect the wire connectors, if equipped.
- Insert the top end of the vanity into the sunshade.
- Engage the snap legs (4).
