Tools Required

J 38778 Door Trim Pad Clip Remover

1. Grasp the roof inner side rear finish molding next to the quarter upper rear trim panel (1).
2. Pull the molding toward the front of the vehicle in order to loosen the molding from the body.
3. Disengage the retainers on the backside of the upper quarter trim panel (1).
4. Pull the panel toward the inside of the vehicle.
5. Remove the upper quarter trim panel (1).

1. Install new fasteners to the upper quarter trim panel (1) if the fasteners are broken or damaged.
2. Align the upper trim panel fasteners to the holes in the body.
3. Press the trim panel (1) into place.
4. Align the inner side rear finish molding to the body.
5. Press the molding into place.