Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
|
Important: Ensure that the battery is in a charged state in order to avoid misdiagnosis. | ||||
1 | Inspect the ignition (IGN) MAIN 1 MaxiFuse. Is there an open in the ignition (IGN) MAIN MaxiFuse? | -- | Go to Step 2 | Go to Step 3 |
2 | Repair the short to ground in CKT 42. Is the repair complete? | -- | Go to Starting System Check | -- |
3 |
Is the voltage equal to the specified value? | 0-9.5V | Go to Step 4 | Go to Step 9 |
4 |
Is the voltage equal to the specified value? | 0-9.5V | Go to Step 5 | Go to Step 12 |
5 |
Is the voltage equal to the specified value? | 0-9.5V | Go to Step 6 | Go to Step 15 |
6 | Inspect for a poor connection or an open in CKT 42. Is there a poor connection or an open in CKT 42? | -- | Go to Step 7 | Go to Step 8 |
7 | Repair the poor connection or the open in CKT 42. Is the repair complete? | -- | Go to Starting System Check | -- |
8 | Replace the underhood Accessory wiring junction block.Relay/Fuse Center Replacement Is the repair complete? | -- | Go to Starting System Check | -- |
9 | Connect a remote starter switch between the starter solenoid terminal S and the positive terminal of the battery. Does the solenoid click? | -- | Go to Step 10 | Go to Step 11 |
10 | Inspect for a poor connection or an open in CKT 1. Is there a poor connection or an open in CKT 1? | -- | Go to Step 18 | Go to Step 11 |
11 | Replace the starter. Refer to Starter Motor Replacement . Is the repair complete? | -- | Go to Starting System Check | -- |
12 | Inspect for an open or for high resistance in CKT 6. Is there an open or high resistance in CKT 6? | -- | Go to Step 13 | Go to Step 14 |
13 | Repair the poor connection or the open in CKT 6. Is the repair complete? | -- | Go to Starting System Check | -- |
14 | Replace or adjust the transaxle range switch. Refer to PNP Switch Replacement or to PNP Switch Adjustment in Automatic Transaxle. Is the repair complete? | -- | Go to Starting System Check | -- |
15 | Inspect CKT 5 for high resistance, a poor connection, or an open. Is there high resistance, a poor connection or an open in CKT 5? | -- | Go to Step 16 | Go to Step 17 |
16 | Repair the poor connection or open in CKT 5. Is the repair complete? | -- | Go to Starting System Check | -- |
17 | Replace the ignition switch. Refer to IGN and Key Alarm Switch Assembly (asm)Ignition Switch Replacement - On Vehicle Is the repair complete? | -- | Go to Starting System Check | -- |
18 | Repair the poor connection or the open in CKT 1. Is the repair complete? | -- | Go to Starting System Check | -- |
