For 1990-2009 cars only
Notice: Proper stoplamp switch adjustment is essential. Improper stoplamp switch adjustment may cause brake drag, heat buildup and excessive brake lining wear.
Important:
• Adjust the stoplamp switch and cruise control release at the same
time. The adjustment procedures for these switches are identical. • For cruise control release switch adjustment, refer to Cruise
Control Release Switch Adjustment in Cruise Control.
- With the brake pedal fully released, ensure that the stoplamp plunger is fully depressed against the brake pedal shanks.
- Insert the stoplamp switch (1) and the cruise control switch (3) (if equipped) into the brake pedal bracket (2).
- Push the brake pedal forward in order to set the brake push rod into the booster.
- Pull the brake pedal to the rear, against the internal stop. The stoplamp switch and cruise control switch will be adjusted.
- Inspect the stoplamp switch for proper adjustment. In order to diagnose the stoplamp, refer to Brake Warning Systems in Electrical Diagnosis.
