Step | Action | Yes | No |
---|---|---|---|
Schematic Reference: Exterior Lights Schematics | |||
1 | Did you review the Exterior Lighting System Description and Operation and perform the necessary inspections? | Go to Step 2 | |
2 |
Do the turn signal lamps and indicators operate properly? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 | Place the turn signal switch in the OFF position. Are any of the turn signals lamps flashing? | Go to Step 5 | Go to Step 4 |
4 | Repair the short to voltage in the supply voltage circuit of the always ON turn signal. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 6 | -- |
5 | Replace the turn signal switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle in Steering Wheel and Column. Did you complete the replacement? | Go to Step 6 | -- |
6 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |
Step | Action | Yes | No |
---|---|---|---|
Schematic Reference: Exterior Lights Schematics | |||
1 | Did you review the Exterior Lighting System Description and Operation and perform the necessary inspections? | Go to Step 2 | |
2 |
Are the turn signal lamps and indicators off? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 | Are any of the turn signals lamps flashing? | Go to Step 11 | Go to Step 4 |
4 |
Important: The turn signal indicator will illuminate if the same side rear turn signal bulb is inoperative and the park lamps are ON. Is only the turn signal indicator illuminated? | Go to Step 5 | |
5 | Are the front turn signals always on? | Go to Step 6 | Go to Step 10 |
6 | Are the automatic headlamps illuminated? | Go to Step 7 | |
7 | Disconnect the daytime running lights control module connector. Are the front turn signals illuminated? | Go to Step 9 | Go to Step 8 |
8 | Test for a short to voltage in the affected turn signal switch signal circuit of the daytime running lamps control module. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 13 | Go to Step 12 |
9 | Repair the short to voltage in the supply voltage circuit of the affected front turn signal. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 13 | -- |
10 | Repair the short to voltage in the supply voltage circuit of the affected signal. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 13 | -- |
11 | Replace the turn signal switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle in Steering Wheel and Column. Did you complete the replacement? | Go to Step 13 | -- |
12 | Replace the Daytime Running Lamps (DRL) control module. Refer to Daytime Running Lights (DRL) Control Module Replacement . Did you complete the repair? | Go to Step 13 | -- |
13 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |