Seat Turns In Before Being Fully Retracted - kw AQW accessory assist operation passenger seat second

When servicing the vehicle with the VIN you entered, the following diagnosis might be helpful if the vehicle exhibits the described symptoms.

Customer may comment that the seat tries to turn into its home position prior to being all the way retracted into the van. Applicable on vans equipped with RPA AQW Sit-N-Lift seat system.

If the upper limit switch operation is compromised by debris, the roller shade cover contacting the switch or the switch bracket being bent this may cause the seat to think it is fully retracted when it is not. Please remove the debris or adjust the shade so it does not make contact with the switch. If the switch itself is damaged, a new one can be ordered through GMSPO (upper limit switch 88963160). For further instructions and diagnostic help, refer to bulletin 04-08-50-002A.

.

Please follow this diagnosis process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed. If these steps do not resolve the condition, please contact GM TAC for further diagnostic assistance. This diagnostic approach was developed for the vehicle with the VIN you entered and should not be automatically be used for other vehicles with similar symptoms.

(2002-04 Oldsmobile Silhouette) and (2002-04 Pontiac Montana) and (2002-04 Chevrolet Venture)

.