Tools Required

J 38778 Door Trim Pad Clip Remover

Important: The defroster door must be closed to allow clearance during defroster duct removal.

1. Set the HVAC controls in the VENT mode to close the defroster door.
2. Remove the I/P carrier. Refer to Instrument Panel Carrier Replacement in Instrument Panel, Gages and Console.



3. Remove the side window defogger ducts from the defroster outlet duct.



4. Using the J 38778 remove the defroster outlet duct retaining clips.
5. Remove the defroster outlet duct from the I/P carrier.

1. Position the defroster outlet duct to the I/P carrier.
2. Connect the defroster outlet duct retaining clips.



3. Install the side window defogger ducts to the defroster outlet duct.
4. Install the I/P carrier. Refer to Instrument Panel Carrier Replacement in Instrument Panel, Gages and Console.