GM Service Manual Online
For 1990-2009 cars only

Rear Seat Recliner Replacement AQ4

Removal Procedure

  1. Remove the rear seat. Refer to Rear Seat Replacement .

  2. Object Number: 461817  Size: SH
  3. Remove the seat back frame (1). Refer to Rear Seat Back Cushion Frame Replacement .
  4. Important: The recliner mechanism is an integral part of the seat back frame. Replace the entire seat back frame if the recliner mechanism requires replacement.

  5. Remove the recliner mechanism (2) and the seat back frame assembly (1).

Installation Procedure


    Object Number: 461817  Size: SH
  1. Install the recliner mechanism (2) and the seat back frame assembly (1).
  2. Install the seat back frame (1). Refer to Rear Seat Back Cushion Frame Replacement .
  3. Install the rear seat. Refer to Rear Seat Replacement .

Rear Seat Recliner Replacement AL4, AT5, AM9

Removal Procedure

  1. Remove the seat. Refer to Rear Seat Replacement .
  2. Remove the recliner covers. Refer to Rear Seat Back Recliner Cover Replacement .

  3. Object Number: 461401  Size: SH
  4. Remove the recliner bolts from the seat cushion.
  5. Remove the back panel from the rear of the seat.
  6. Remove the seat back cover and pad away in order to expose the recliner bolts.

  7. Object Number: 461831  Size: SH
  8. Remove the recliner bolts from the seat back.
  9. Remove the recliner from the seat.

Installation Procedure


    Object Number: 461831  Size: SH
  1. Install the recliner to the seat back.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the recliner to the seat back bolts.
  4. Tighten
    Tighten the recliner bolts to 32 N·m (24 lb ft).


    Object Number: 461406  Size: SH
  5. Install the recliner to the seat cushion bolts.
  6. Tighten
    Tighten the recliner bolts to 32 N·m (24 lb ft).


    Object Number: 461732  Size: SH
  7. Install the back panel to the rear of the seat.
  8. Install the recliner covers. Refer to Rear Seat Back Recliner Cover Replacement .
  9. Install the seat. Refer to Rear Seat Replacement .