GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Opel 🢒 2008 🢒 Antara 🢒 Preface 🢒 Cautions and Notices 🢒 Power Steering Control Module Replacement

Removal Procedure
  1. Disconnect negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the driver knee bolster. Refer to Knee Bolster Replacement .
  3. Disconnect the connector of SSPS control module.

    4. Object Number: 1768751 Size: SH
  4. Remove the SSPS control module from the bracket by sliding the control module upward.

    5. Object Number: 1768762 Size: SH
  5. Remove the bracket by removing the bolts, if needed.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1768762 Size: SH
  1. Install the control module bracket and the bolts.

    2. Tighten
    Tighten the SSPS control module bracket bolts to 10 N·m (88.5 lb in).


    Object Number: 1768766 Size: SH
  2. Install the SSPS control module to the bracket.
  3. Connect the connector of SSPS control module.
  4. Install the driver knee bolster. Refer to Knee Bolster Replacement .
  5. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .