GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Opel 🢒 2008 🢒 Antara 🢒 Preface 🢒 Cautions and Notices 🢒 Ignition Lock Cylinder Bulb Replacement

Removal Procedure

    Object Number: 1885470 Size: SH
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the steering column cover. Refer to Steering Column Trim Covers Replacement .
  3. Disconnect the electrical connector.
  4. Remove the key hole lamp retaining screw.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1885470 Size: SH
  1. Install the key hole lamp retaining screw.

    2. Tighten
    Tighten the key hole lamp retaining screw to 2.5 N·m (22 lb in).

  2. Connect the electrical connector.
  3. Install the steering column cover. Refer to Steering Column Trim Covers Replacement .
  4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .