GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .

  2. Object Number: 1758352  Size: SH
  3. Pry off the reading lamp lens by inserting a screwdriver into the recess along the edge of the lens.
  4. Remove the screws and the reading lamp housing from the headliner.
  5. Disconnect the electrical connector.
  6. Remove the bulb.

Installation Procedure


    Object Number: 1758353  Size: SH
  1. Install the replacement bulb.
  2. Connect the electrical connector.
  3. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the reading lamp housing to the headliner with the screws.
  5. Tighten
    Tighten the map lamp housing screw to 2 N·m (18 lb in).

  6. Press the reading lamp lens onto the housing.
  7. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .