GM Service Manual Online
For 1990-2009 cars only
Makes
๐ข
Opel
๐ข
2009
๐ข
Antara
๐ข
Engine
๐ข
Engine Electrical
๐ข Fuel Injector Sight Shield Replacement
Removal Procedure
Loosen the clamp and disconnect the flexible air intake duct from the mass air flow (MAF) sensor assembly.
Loosen the clamp and disconnect the air intake duct from the throttle body assembly.
Unclip the clip and disconnect the positive crankcase ventilation (PCV) hose from the air intake duct.
Remove the air intake duct assembly.
Remove the fuel injector sight shield attaching bolts and nuts.
Remove the fuel injector sight shield.
Installation Procedure
Caution:
Refer to
Fastener Caution
in the Preface section.
Install the fuel injector sight shield and tighten the attaching bolts and nuts to
8 Nยทm (71 lb in)
.
Install the air intake duct assembly.
Tighten the loosened clamps.