Engine Oil Pressure Sensor and/or Switch Replacement for Opel Antara 2009

Warning: Refer to Battery Disconnect Warning in the Preface section.




1. Disconnect the negative battery cable.
2. Remove the engine dress cover. Refer to Fuel Injector Sight Shield Replacement.
3. Drain the engine oil by removing the engine oil drain plug.
4. Disconnect the wiring harness connector from the engine oil pressure sensor.



5. Remove the engine oil pressure sensor.

Caution: Refer to Fastener Caution in the Preface section.




1. Install the oil pressure sensor and tighten to 13 N·m (115 lb in).
2. Connect the engine oil pressure sensor connector.