GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Opel 🢒 2009 🢒 Antara 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Output Speed Sensor Replacement

Removal Procedure

    Object Number: 1371167 Size: SH
  1. Disconnect the wiring harness (2) from the output shaft speed sensor.

    2. Object Number: 1412450 Size: SH
  2. Remove the output speed sensor bolt (3).
  3. Remove the output shaft speed sensor (2) and the O-ring (1).

Installation Procedure

    Object Number: 1412450 Size: SH
  1. Apply GM T-IV automatic transaxle fluid GM P/N 88900925 to the new output speed sensor O-ring (1).
  2. Install the new output speed sensor O-ring (1) onto the output speed sensor (2).
  3. Install the output speed sensor (2) into the transmission case assembly.

    4. Caution: Refer to Fastener Caution in the Preface section.

  4. Install the output speed sensor bolt (3) and tighten to 6 N·m (53 lb in).

    5. Object Number: 1371167 Size: SH
  5. Connect the wiring harness (2) to the output shaft speed sensor.